Triggered Events and Continuous Monitoring simultaneously: Continuous monitoring is not interrupted by a triggered event.

No Down Time: Triggered event processing does not delay subsequent triggered events.

Trigger on Vector Sum Threshold: Also trigger on microphone (dBL) and/or individual elements.

Remote Monitoring: Optional on-board modem (GSM, Next G or Landline) with antenna provides remote monitor communication functions. This opens up opportunities for long-term remote site monitoring and unattended operation,
with consequent cost savings in staff labour.

Duty Timetables: T-Link allows the user to create duty timetables, enabling the monitor to go into ‘sleep’ mode when monitoring is not required. This helps to conserve battery life between charges.

Range Change: Now available through T-Link software.

Overpressure Peak Detect: The ETM-PI incorporates circuitry to detect peak overpressure, providing a 100µs detector onset time as required by many environmental authorities.

Vibration Dose Value (VDV): All event data are processed within the monitor and results comply with AS2670/BS6472 (or overseas equivalent).

Standard 32-bit processor: Provides sampling rates up to 40 kHz.

Zero Crossing Frequency: Results are available in all reports and all events (Except VDV and A-Weight).

Vector sum result in continuous mode.

Event data: All event data are processed within the monitor, including ground vibration, peak vector sum and Vibration Dose Value (VDV).

Retrieve while monitoring: Results can be retrieved (either directly or remotely) without interrupting monitoring.

Easy PC communication: RS232 serial interface or a USB port (using serial adapter cable).

Large Backlit LCD: Readable under all lighting conditions.

Directional keypad: For simple navigation through the ETM-PI’s menus, which are similar to Texcel’s proven µMX, ATM and CTM instruments.

SMS Notification: The ETM-PI (when equipped with a modem) can send SMS messages to a number of people when a specified trigger level has been exceeded. The SMS can be either a customised message or the event data (exceedance levels only).

Standard 16 Mbyte onboard memory: Allows thousands of waveforms and tens of thousands of events to be stored.

Power supply: The ETM-PI draws power from its own solar panel (included), mains supply, or (optional) external battery making it suitable for operation in almost any situation.

Packaging: The ETM-PI is packaged in a lockable, rugged and weatherproof case which is fixed securely to a steel pole.

Accessory Options: T-Sched, External Battery, Weather Station, Mains Charger.

Sensor Options: Standard triaxial geophone, low frequency, high range, microphone. For more information go to the Sensor Options page.